NAEF pneumatic punch press p-44
    

Cutting Dies and Punch Press Manufacturing since 1909
 Paper * Plastics * Cardboard * Textiles * Rubber or Soft Material

Pneumatic Punch Press Model P - 44
 
Specifications
  
NAEF USA home Page
NAEF USA Presses
NAEF USA Cuitting Dies
NAEF USA Die Sharping
Band-All automatic label banding

Capacity
Approx.. Air press.
Max. Lineal cutting edge
Projection
Piston Stroke
Die Opening
Die holding dia.(pressure plate)
Table Width
Table Depth
Machine Height
Machine Width
Machine Depth
Net Weight
Shipping Weight

7000 lbs
80 psi
40"
6 "
1"
7/8"
7-1/2"
13-3/4"
11-1/2"
24"
17-1/2
29"
215 lbs
276 lbs

 
The NAEF P-44 Pneumatic Punch Press is a convenient table model. This Punch Press will take up a minimum amount of space. The P-44 needs only shop air connection for operation. For maintenance the press comes equipped with a filter-regulator-lubricator unit. The die is supported securely to the the clamping chuck, (Pressure Plate and Gripper) and stays in place during cutting and removal of the samples. The depth-guage prevents penetration into the table top surface.
we accept Master Card
NAEF Press & Dies, Inc.
2 Braley Point Road
P. O. Box 1249
Bolton Landing, New York 12814-1249
we accept VISA
  Phone: (518) 644 - 2018
Fax: (518) 644 - 2546
  
NAEF Home Page
Pneumatic Punch Press P-44
Manual Punch Press B-36
Manual Punch Press D-42
Die Sharpening

E-mail us
Cutting Dies
NAEF Presses
ASTM Dies
banding products
Copyright ©2000-2001 NAEF Press & Dies, Inc. All rights reserved. Information in this document is subject to change without notice. Other products and companies referred to herein are trademarks or registered trademarks of their respective companies.
Site designed and maintained by